The red and yellow disappearing nine patch quilt I am making is finally coming together.

In total, it has seventeen different rows, seventeen different prints, gradated from a deep red to yellow. Some of the challenges with this particular design were ones of my own making. I had an idea in my head to start, so I know what I wanted the finished quilt to look like. Usually, I work backwards to that – knowing the pattern and picking particular fabrics usually winds up a surprise in what the actual top will look like. (Well, somewhat, but you know what I mean.)

In this case, I wanted certain colors in defined places. With the disappearing nine patch pattern, one usually makes a large nine-patch block (3 blocks by 3 blocks) and makes a cut horizontally & vertically through the middle blocks. Since I wanted particular placement of colors, I cut each one to start and worked row by row according to my diagram.

Tho at times I didn’t look at it. 😀 First small issue: in my zeal to finish, I had sewn every print block to a white rectangle in pairs, except the 3″ block rows have a block at each end, and the large block rows have a white rectangle at each end. So the other night, I had to unpick a white rectangle off the end of the smaller block rows and sew it on to the bigger ones.

If you look closely at the picture, you’ll see a ripple on the larger row with the red & white gingham. I hate that fabric. It has a higher polyester count, I am sure, and it slippery and prone to ravel. Because of that, my seams are off in this row and it is about a half inch longer than it should be. I’m being extra careful to match seams when I sew rows together, so this will take some easing when I sew it to the next row. The spray starch helps, but it can’t fix everything.

In the pic above, most of the rows have been paired. There are six more rows on my work table waiting to be assembled this weekend.

Ron also pointed out one row where I used a directional print, and half of the blocks go one way with the rest of them going another way. Small tiny issue, yes. This one doesn’t bug me. (much.) Otherwise, that’s it. There’s no complicated sewing, just straight seams. The small blocks are 3″, the large ones 6″ and the rectangles 3×6″. Cutting was extremely easy as those are the widths of my rulers.

The takeaway lesson here I realized last night when seeing how it all came together and where some fabrics were placed. There were some fabrics I had limited amounts of, and because of this, placed them in smaller rows instead of a larger one – a row which would have made a better transition of color to the next row. So: when planning a quilt with prints in particular places, don’t constrain yourself with fabric amounts. Get more. 😀 Substitute if you have to.

Also see when I cut it out and
when I planned the quilt. I took a while with it because I really had to think about the fabrics and the placement. Just restating that more fabric in some prints would have helped. For the curious, a fat quarter was more than enough. I just has scraps of some and tried to squeeze out what I could.

This is a quilt I would actually make again, and I am strongly considering writing up a pattern for it. It would mostly deal with how to pick the colors and where to put them, because the sewing bit is the easy part. I’m thinking next time, go from a deep blue at one end, to a green at the other. Ooooooooo…