Pinwheel baby quilt

Posted on 2 Comments

Sometime last year I did a quick and easy throw quilt from Tula Pink’s Elizabeth fabrics and very large rectangle snowball blocks. No pictures or write up yet though, sorry.

But! The triangle bits cut off the corners were plentiful and quite large. Enough to make a baby quilt for sure. I sewed up each corner as I cut them off – working on two quilts at once – and played around a bit with layout.

Still need cornerstone dashing on the sides, but this baby quilt top from scraps is almost done. #quilting

Pinwheels are pretty straightforward, so to liven up the boredom, I also added sashing with cornerstone blocks from more scraps. The white sashing itself was from my white scrap bin too.

I swear, this fabric is going to live on forever… I also have a runner from more scraps from the same project.

All done! It's about 38" square, baby quilt sized. Gonna sell it so if you want it holler. Ready in January.

I posted a picture of the completed top and Kathy contacted me to claim it for her granddaughter. Fun! Anything for a fellow member of the cool grandma club.

For the quilting, I wanted it to be nice and custom and pretty and basically what I call quilting the heck out of it. But first, I stitched in the ditch around each block. Technically I could have left it there, it was secure enough. But you know me!Today's project. Some might think this is done or they may stop here. I ditched along the seams in all directions for stability for the next steps. After lunch I'm gonna quilt the hell out of this and you can see the difference. ?

I wanted to challenge myself as well, and time it so I could see how long it took for me to quilt when focused.

The sashing has back and forth lines, sometimes called switchbacks.

Each cornerstone has “bumps” – a curved line that goes from corner to corner.

The pinwheels also have bumps in each triangle, but with them all together almost form a flower. It only took a couple of blocks to figure out the best way to travel with the least amount of back tracking.

An hour and twenty five minutes. That's how long this took me to quilt. This includes changing the needle that was giving me issues and stopping to wind 3 more bobbins. Yep, I quilt fast.

Did I mention I hate breaking threads? Most of the quilting here is done all in one go, save for bobbin changes.

The small border around the outside, same width as the sashing, is done in half feather bumps, just to soften the look a bit. I had trimmed the quit after the first step of straight quilting, and by the time I got to the borders was kicking myself. Some places I was holding on with my fingertips!

image

Super happy with those corner turns too.

So, time spent doing the initial straight quilting was 20 minutes. I stopped for lunch, swapped out the walking foot for the FMQ foot and went at it, knowing what to do for each section. I quilt fast and at top speed. Time spent for the custom work? An hour and a half. Maybe an hour and 20 mins.

Then it was on to the fabric choices for binding. I sent Kathy a picture with options.

image

She picked the green stripes. Perfect! I cut it on the bias, because bias striping is always a great choice.

image

The finished quilt.

image

All this puckered crinkly goodness is after washing. It already looks like a family heirloom!

Have a look at the back.

image

When the quilt arrived at Kathy’s place she said the same thing my mom always says. “The pictures don’t do it justice!”  😀

Butterfly quilt

Posted on Leave a comment

I took on a quilting job that was not for my mom. One of my remote co-workers had seen pictures of my quilts and loved them. She was working on a baby quilt of her own and was not happy with the quilting she had started.

So, she asked if I would quilt it for her – for PAY even!

IMG_2642

This is how the quilt arrived – basted and some preliminary lines done. She said she wasn’t sure she liked what she had already done, so if I had other ideas, it was totally okay to take them out if I wanted.

IMG_2646

So I did. Honestly, this was the bulk of the work.

IMG_2677

I pressed the top and the backing quite throughly and basted it again to new batting, replacing the 100% poly with a 50/50 blend.

IMG_2819

And boy howdy did I have ideas! I thought it would be best to have Mctavishing in the white blocks, and a feathery design on the pink triangles.

I settled on a heart & feather combo. I did use a template for this and stitched over tracing paper to have a design to follow.

I did also stitch in the ditch on the seam lines, but only the pink ones – not inner ones on white blocks. These were mostly diagonal and just to divide the quilt into sections for quilting.

IMG_2821

Back view – you can see I just went around the butterflies and left them unquilted.

IMG_2940

The finished quilt! I machine bound it with strips cut off the backing when I trimmed it after quilting.

IMG_2941

Here’s a close up of the crinkly goodness after I washed and dried it. I always do this for quilts I know that will be used.

IMG_2943

Overall back view.

When Corinne received her quilt back in the mail she was SO HAPPY.

Three green baby quilts

Posted on Leave a comment

A while back, I found a great quilt pattern in a magazine for 3 fast baby quilts from 3 one yard cuts of fabric. You can download the pattern here from Quiltmaker magazine.

I have made this a few times before, and it’s great to make baby quilts when there is a boom or just to have on hand for gifts. The finish up really fast and can get quilted in no time.

Well, in the company I work for we had babies popping out all over, so one day I grabbed three nice co-ordinating fabrics. I’m not sure of the line, since Mom bought them, but they had bunnies and carrots and garden implements. I also couldn’t find the pattern, but figured I could wing it from memory.

WELL.

I cut the fabric wrong.

I did manage to get two quilt tops from it, which technically was what I needed. The inner square wound up smaller than it should have.

On one quilt, I did huge swooping feathers all around, with the baby name stitched in the center.

IMG_2334

And of course I can’t find a picture of the second quilt, but it was similar to the one above, just different fabric placement. Edit: found some progress pictures from August 25th 2014!

IMG_1936

IMG_1935

The recipient of this particular one asked if I used some sort of pattern for the stitching design. He was floored when I said no – it was freehand!

IMG_2501

Since I mis-cut fabrics, with the rest I simply cut them all into squares and laid them out with each print on the diagonal.

IMG_3283

I know I’m using the same picture as the last entry, but you can see the baby quilt here, folded in half. I just did all over stippling on this one. It is currently without a home and I will likely list it in my Etsy shop.

Appliqued baby name quilt

Posted on Leave a comment

When I heard I was going to be a grandmother for the third time in four years, well of course my first thought was what quilt I was going to make.

Okay, maybe that was my second thought.

After I made this baby quilt, I figured you would love to have this free baby quilt pattern. It was super fast and easy to make.

I had a yard or two of a lovely fabric with dancing bunnies in pretty pastel Easter gowns. It was perfect after we knew we would be expecting another girl. I pulled some somewhat matching tiny prints for the letters for the front of the quilt.

baby quilt letter placement

For the front piece of the baby quilt, I used about a yard of a tone on tone off-white print. It’s about 30-36″ by the 42″ width of the fabric. Then I cut the letters freehand from the fat quarters I had chosen to complement the print on the back.

The letters could also be done with a large thick font. My size was about as big as a regular sheet of printer paper, so you could draw them out on paper first and then cut them from the fabric.

It would be smarter as well, to fuse some fusible web to the back of the fabric before cutting out the letters. I didn’t, and it made my work a bit harder.

Also if you have a name with a lot more letters, you will need to make the letters smaller so they all fit. If you’re not sure, do a test with paper letters first.

baby quilt testing fabric placement

 

You can see here how I didn’t like the original fabric for the letter A and swapped it for a yellow instead.

fusing letters in place on baby quilt

 

Here’s the quilt on my design board with the letters pinned in place to test placement. You can go vertically in a straight line – mark a guide line if you like – or go all funky and wonky.

Fuse the letters in place. This is mostly to hold them down before appliquéing.  I used a blanket stitch that came on my Bernina Aurora 440 Quilter’s Edition. A zig zag will also work perfectly fine.

back of baby quilt

 

Baste the top and bottom together with your favourite batting and quilt away! I used an allover paisley design, and went around the letters entirely, adjusting the design to fit. This is great practise for any allover design you want to try. And a baby quilt is a great size to practise on.

I also used a pretty Sulky variegated thread in pink / green / yellow. It matched perfectly.

easy fast baby quilt

 

You can see here how puffy the letters look. The only thing I would do different now is to outline quilt the letters.

IMG_0624

 

I bound the quilt in a jade green dot that was actually from a line of Christmas fabric. It works though!

I always pre-wash my quilt, so after coming out of the washer and dryer, the cotton fabrics and cotton batting crinkled up so nicely. It looks like a family heirloom already.

This is a super easy and fast quilt to through together. Just make sure the parents don’t change the name before birth, if you are making one ahead of time. 😉